JB/T 11971-2014 (English Version) PDF

Scope: This standard specifies the terms and definitions, technical requirements, test methods, inspection rules and marking, packaging, storage and custody of tractor wiring harnesses (hereinafter referred to as wiring harnesses). This standard applies to wiring harnesses (including single wires) for agricultural and forestry tractors with a nominal voltage not exceeding 24 V. Other agricultural machinery may refer to this standard.

JB/T 11971-2014 Referenced Document

GB 11121 Gasoline engine oils
GB 17930 Gasoline for motor vehicles*， 2016-12-23 Update
GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
HG/T 2196 Classification system for rubber materials for automobiles
JB/T 6697-2006 Basic specifications of electric equipment for motor vehicles and internal-combustion engine
JB/T 8139 Road vehicles-low voltage cables(wires)
QB/T 2423 Polyvinyl chloride (PVC) electrical insulation pressure sensitive adhesive tape
QC/T 238 Storage and custody of auto parts
QC/T 29010 Type, size and technical requirements of low-voltage wire connectors for automobiles
QC/T 413-2002 Basic Technical Conditions of Automotive Electrical Equipment
QC/T 417.1 Automotive wiring harness connectors Part 1 Definitions, test methods and general performance requirements (automotive part)
QC/T 417.3 Automotive wiring harness connectors - Part 3 Dimensions and special requirements for single-wire blade connectors
QC/T 417.4 Automotive wiring harness connectors - Part 4 Dimensions and special requirements for multi-wire blade connectors
QC/T 730 Road vehicle - Low tension cables with thin wall insulated
UL 224 Extruded insulating tubing