This standard specifies the type, model, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of large and medium-sized submersible electric pumps. This standard applies to large and medium-sized submersible electric pumps with power greater than 22 kW (hereinafter referred to as electric pumps).
JB/T 11916-2014 Referenced Document
GB 10068 Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity
GB 10395.8 Tractors and machinery for agriculture and forestry.Technical means for ensuring safety.Part 8: Irrigation pumps and machines
GB 10396 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment.Safety signs and hazard pictorials.General principles
GB 1971 Rotating electrical machines. Terminal markings and direction of rotation
GB 755 Rotating electrical machines.Rating and performance
GB/T 10069.1 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 191 Packaging.Pictorial marking for handling of goods
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
GB/T 5013.4 Rubber insulated cables of rated voltages up to and including 450/750 V.Part 4: Cords and flexible cables
GB/T 9239.1 Mechanical vibration. Balance quality requirements for rotors in a constant(rigid) state. Part 1: Specification and verification of balance tolerances
GB/T 9439 Gray cast iron parts*, 2023-09-07 Update
JB/T 5673 Agriculture and forestry tractors and machinery.General requirements of painting*, 2015-10-10 Update
JB/T 5811 Test method and limits of form-wound winding for alternating current low-voltage electrical machines
JB/T 7593 Specification for Y series three-phase high voltage induction motor (Frame numbers 355 to 630)
JB/T 8735.2 Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V.Part 2: Tough rubber sheathed flexible cables for general purposes*, 2016-04-05 Update
JB/T 11916-2014 history
2014JB/T 11916-2014 Large and medium-sized submersible motor-pumps