HJ 662-2013
Environmental protection technical specification for co-processing of Solid wastes in cement kiln (English Version)

Standard No.

HJ 662-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Environmental Protection

Latest

HJ 662-2013

Scope

This standard specifies the technical requirements for environmental protection in terms of facility selection, equipment construction and modification, operation and pollution control for the collaborative disposal of solid waste using cement kilns. This standard applies to hazardous waste, domestic waste (including waste plastics, waste rubber, waste paper, waste tires, etc.), urban and industrial sewage treatment sludge, animal and plant processing waste, contaminated soil, emergency waste and other solid waste in cement Co-processing in kilns. Cement products produced using fly ash, steel slag, sulfuric acid slag, blast furnace slag, coal gangue and other general industrial solid waste as alternative raw materials (including mixed materials) and fuel shall be subject to the provisions of Section 7.2 of this standard.

HJ 662-2013 Referenced Document

• AQ/T 9002 Guiding principle for production and operation units to draw up contingency plans to deal with production safety accidents
• GB 12573 Sampling method of cement
• GB 14554 Emission standards for odor pollutants
• GB 15562.2 Environmental protection pictorial sign - solid waste storage (disposal) site*， 2023-01-20 Update
• GB 175 General Purpose Portland Cement*， 2023-11-27 Update
• GB 18597 Standard for pollution control on hazardous waste storage*， 2023-01-20 Update
• GB 30485 Standard for pollution control on co-processing of solid wastes in cement kiln
• GB 4915 Emission standard of air pollutants for cement industry
• GB 50016 Architectural design code for fire protection
• GB 5085.1 Identification standards for hazardous wastes Identification for corrosivity
• GB 5085.4 Identification standards for hazardous wastes Identification for ignitability
• GB 5085.5 Identification standards for hazardous wastes Identification for reactivity
• GB 8978 Integrated wastewater discharge standard
• GBZ 2.1 "Occupational Exposure Limits of Hazardous Factors in the Workplace Part 1: Chemical Hazardous Factors" (GBZ 2.1-2019) No. 1 Amendment*， 2022-11-08 Update
• GBZ 2.2 Occupational exposure limits for hazardous agents in the workplace part 2:physical agents
• HJ 421 Standard of packaging bags,containers and warning symbols specific tomedical waste
• HJ/T 176 Technical specifications for centralized lncineration facility construction on hazardous waste
• HJ/T 177 Technical specifications for centralized lncineration facility construction on medical waste
• HJ/T 20 Technical specifications on sampling and sample preparation from industry solid waste
• HJ/T 298 Technical specifications on identification for hazardous waste
• HJ/T 299 Solid waste. Extraction procedure for leaching toxicity. Sulphuric acid & nitric acid method
• HJ/T 76 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)

HJ 662-2013 history

• 2013 HJ 662-2013 Environmental protection technical specification for co-processing of Solid wastes in cement kiln