This standard specifies the terms, definitions, performance requirements, test methods, inspection rules, etc. of anodized coatings on polished surfaces of aluminum alloys. This standard applies to aluminum and aluminum alloy surfaces that have been mechanically polished and/or chemically polished (or electrolytically polished). , a film formed after surface treatment by anodizing, electrolytic coloring (or dyeing), etc. (hereinafter referred to as polished surface anodized film). This standard is suitable for polishing aluminum and aluminum alloys in furniture, lamps, electronic appliances, automobiles and other industries. Surface anodized film,
GB/T 12967.1 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance*, 2020-06-02 Update
GB/T 12967.3 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test*, 2022-03-09 Update
GB/T 12967.4 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance*, 2022-03-09 Update
GB/T 12967.6 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance*, 2022-03-09 Update
GB/T 1740 Determination of resistance to heat and humidity of paint films
GB/T 20503 Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss at angles of 20°,45°,60°or 85°
GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6682 Water for analytical laboratory use.Specification and test methods
GB/T 8005.3 Aluminium and aluminium alloys. Terms and definitions. Part 3: Surface treatment
GB/T 8013.1-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys Part 1: Anodic oxide coatings
GB/T 8752 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coating. Copper sulphate test
GB/T 8753.1 Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1:Measurement of the loss of mass after immersion in acid solution(s)*, 2017-05-31 Update
GB/T 8753.3 Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 3:Admittance test
GB/T 8753.4 Anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings Part 4:Dye spot test with prior acid treatment
YS/T 873-2013 history
2013YS/T 873-2013 Specification of polishing coating on aluminum alloy