CJ/T 427-2013
Ultra-high molecular weight polyethylene sheet composite pipe (English Version)

Standard No.

CJ/T 427-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Urban Construction

Latest

CJ/T 427-2013

Scope

This standard specifies the terms and definitions, materials, structure and connections, requirements, test methods, inspection rules, marking, transportation and storage of ultra-high molecular weight polyethylene diaphragm composite pipes. This standard is applicable to buried water supply and pressurized drainage pipes with working pressures less than or equal to 1.6MPa. It is also applicable to pipes transporting normal temperature media such as seawater and slurry.

CJ/T 427-2013 Referenced Document

• GB/T 10006 Plastics—Film and sheeting—Determination of the coefficients of friction*， 2021-03-09 Update
• GB/T 1033.2 Plastics.Methods for determining the density of non-cellular plastics.Part 2:Density gradient column method
• GB/T 1036 Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer
• GB/T 1040.1 Plastics—Determination of tensile properties—Part 1:General principles*， 2018-12-28 Update
• GB/T 1043.1 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
• GB/T 15560 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids
• GB/T 1633 Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)
• GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
• GB/T 1842 Environmental stress cracking test method for plastic polyethylene
• GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
• GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
• GB/T 2918 Standard environment for conditioning and testing of plastic specimens*， 2019-11-01 Update
• GB/T 3682 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• GB/T 4217 Thermoplastics pipes for the conveyance of fluids.Nominal outside diameters and nominal pressures
• GB/T 5470 Plastics.Determination of the brittleness temperature by impact
• GB/T 6111 Thermoplastics piping systems for the conveyance of fluids.Determination of the resistance to internal pressure*， 2018-03-15 Update
• GB/T 7122 Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method
• GB/T 7124 Adhesives.Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
• GB/T 8806 Plastics piping systems.Plastics components.Determination of dimensions

CJ/T 427-2013 history

• 2013 CJ/T 427-2013 Ultra-high molecular weight polyethylene sheet composite pipe