GB/T 27748.3-2011 (English Version) PDF

Standard No.: GB/T 27748.3-2011
Language: Chinese, Available in English version
Release Date: 2011
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status: Be replaced 2018-04
Replace By: GB/T 27748.3-2017
Latest: GB/T 27748.3-2017

Scope: This part of GB/T 27748 specifies the minimum safety requirements for indoor and outdoor installation of stationary fuel cell power generation systems under the condition of complying with GB/T 27748.1-2011 "Safety of Stationary Fuel Cell Power Generation Systems", and applicable Installation in the following systems: - electrically connected to the main equipment directly or through a transfer switch; - independent power distribution systems; - installations that can supply alternating current or direct current; - installations with or without heat recovery. This section does not apply to: - fuel supply and/or fuel storage systems; - couplings to the grid; - portable fuel cell power generation systems; - driven fuel cell power generation systems; - auxiliary power unit (APU) applications equipment. Typical stationary fuel cell power generation system components Table 1

GB/T 27748.3-2011 Referenced Document

GB 20936.4 Electrical apparatus for the detection and measurement of flammable gases.Part 4:Performance requirements for group Ⅱ apparatus indicating a volume fraction up to 100% gas
GB 3836.14 Explosive atmospheres.Part 14:Classification of areas.Explosive gas atmosphere*， 2014-12-05 Update
GB/T 16856 Safety of machinery.Risk assessment.Practical guidance and examples of methods*， 2015-12-10 Update
GB/T 20042.1 Proton exchange membrane fuel cell—Part 1: Terminology*， 2017-05-12 Update
GB/T 21109.3 Functional safety.Safety instrumented systems for the process industry sector.Part 3:Guidance for the determination of the required safety integrity levels
GB/T 27748.1-2011 Stationary fuel cell power system.Part 1：Safety
GB/T 5464 Non-combustibility test method for building materials
IEC 61779-6 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
IEC 61882 Hazard and operability studies (HAZOP studies) - Application guide*， 2016-03-10 Update