JB/T 4362-2011
Power station axial fans (English Version)
- Standard No.
- JB/T 4362-2011
- Language
- Chinese, Available in English version
- Release Date
- 2011
- Published By
- Professional Standard - Machinery
- Latest
- JB/T 4362-2011
- Replace By
- AASHTO T 65M/T 65-2013
- Replace
- JB/T 4362-1999
- Scope
- This standard specifies the technical requirements, test methods, inspection rules, marking, packaging and transportation, storage and maintenance of axial flow fans in power stations. This standard applies to axial flow blowers, induced draft fans and primary air fans for thermal power station boilers, and also applies to axial flow desulfurization and denitrification fans (hereinafter referred to as fans) in thermal power stations. The working medium temperature of the blower and primary air fan shall not be higher than 70℃ under normal circumstances; the working medium temperature of the induced draft fan shall not be higher than 250℃. The medium transported by the blower and primary air fan is air, and the medium transported by the induced draft fan is flue gas. The dust content of the flue gas (under standard conditions) is ≤150mg/m.
JB/T 4362-2011 Referenced Document
- GB/T 10178 Industrial fans Performance testing in situ
- GB/T 1236 Industrial fan—Performance testing using standardized airways*， 2017-11-01 Update
- GB/T 13306 Plates
- GB/T 2888 Methods of noise measurement for fans blowers compressors and Roots blowers
- JB/T 10213 Fans.Specifications for welding inspection*， 2014-07-09 Update
- JB/T 6444 General Technical Specifications for Fan Packaging*， 2019-08-02 Update
- JB/T 6886 Technical specification for draught fan application
- JB/T 6887 Technical Specifications for Iron Castings for Fans*， 2022-10-20 Update
- JB/T 6888 Specifications for steel castings for fans*， 2018-12-01 Update
- JB/T 8689 Fan vibration detection and its limited value*， 2014-07-09 Update
- JB/T 8690 Fans.Noise limited value*， 2014-07-09 Update
- JB/T 9101 Fan rotor balance*， 2014-07-09 Update
JB/T 4362-2011 history
- 2011 JB/T 4362-2011 Power station axial fans
- 1999 JB/T 4362-1999 Power station axial fans
JB/T 4362-2011 Power station axial fans was changed to AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings.
