MT/T 575-2011
YBRB series flameproof three phases asynchronous motor for pump (English Version)

Standard No.

MT/T 575-2011

Language

Chinese, Available in English version

Release Date

2011

Published By

Professional Standard - Coal

Latest

MT/T 575-2011

Replace

MT/T 575-1996

Scope

This standard specifies the type and basic parameters, technical requirements, test methods, inspection rules, marking, packaging and storage of YBRB series flameproof three-phase asynchronous motors for pumps. This standard is applicable to motors for emulsion pump stations and spray pumps. Motors for oil pumps in coal shearers, tunnel boring machines and other similar mining machinery may be used as a reference.

MT/T 575-2011 Referenced Document

• AQ 1043-2007 Mining Products Safety Label
• GB 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity
• GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
• GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres-Part 2: Flameproof enclosure "d"
• GB 3836.3-2010 Explosive atmospheres.Part 3:Equipment protection by increased safety "e"
• GB 755-2008 Rotating electrical machines.Rating and performance
• GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
• GB/T 10111-2008 Generation of random numbers and procedures applied to sampling inspection for product quality
• GB/T 1032-2005 Test procedures for three-phase induction motors
• GB/T 191-2008 Packaging.Pictorial marking for handling of goods
• GB/T 1993-1993 Cooling methods for rotating electrical machines
• GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
• GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
• GB/T 997-2008 Rotating electrical machines.Classification of types of construction,mounting arrangements and terminal box position for(IM Code)
• JB/T 9615.1-2000 Test methods of the interturn insulation on random wound winding for AC low-voltage machines
• JB/T 9615.2 Test Limits of the interturn insulation on random wound winding for AC low-voltage machines

MT/T 575-2011 history

• 2011 MT/T 575-2011 YBRB series flameproof three phases asynchronous motor for pump
• 1996 MT/T 575-1996 Flameproof…..intended to be used in YBRB series pumping station Three-phase asynchronous motors