YD/T 2286-2011
Single fiber bi-directional subassembly for 10Gbit/s EPON OLT/ONU (English Version)

Standard No.
YD/T 2286-2011
Language
Chinese, Available in English version
Release Date
2011
Published By
Professional Standard - Post and Telecommunication
Latest
YD/T 2286-2011
Scope
This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, marking, packaging, storage and transportation requirements for single-fiber bidirectional optical components used in 10Gbit/s EPON optical line terminals/optical network units (OLT/ONU) wait. This standard applies to single-fiber bidirectional optical components of 10Gbit/s EPON optical line terminal/optical network unit (OLT/ONU).

YD/T 2286-2011 Referenced Document

  • GB/T 21548-2008 Methods of measurement of the high speed semiconductor lasers directly modulated for optical fiber communication systems
  • GB/T 24365-2009 Testing methods of optoelectronic detector module for communication
  • GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
  • GB/T 6663.1-2007 Directly heated negative temperature coefficient thermistors Part 1: Generic specification
  • GB/T 9771.1 Single-mode optical fibres for telecommunication—Part 1: Characteristics of a dispersion unshifted single-mode optical fibre*2020-06-02 Update
  • GB/T 9771.2 Single-mode optical fibres for telecommunication—Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre*2020-06-02 Update
  • GB/T 9771.3 Single-mode optical fibres for telecommunication—Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre*2020-06-02 Update
  • GB/T 9771.4 Single-mode optical fibres for telecommunication—Part 4: Characteristics of a dispersion shifted single-mode optical fibre*2020-06-02 Update
  • GB/T 9771.5 Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre*2020-06-02 Update
  • GB/T 9771.6 Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport*2020-06-02 Update
  • GB/T 9771.7 Single-mode optical fibres for telecommunication—Part 7: Characteristics of a bending loss insensitive single-mode optical fibre*2022-10-14 Update
  • IEEE 802.3av-2009 Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method and p*2024-04-19 Update
  • SJ/T 11363-2006 Requirements for concentration limits for certain hazardous substances in electronic infromation products
  • SJ/T 11364-2006 Marking for control of pollution caused by electronic information products
  • YD/T 1419.2-2005 Technical conditions of Triplexer optical assembly for access network Part 2: General characteristics of Triplexer optical assembly for Ethernet passive optical network (EPON) light network unit (ONU)
  • YD/T 1688.2-2010 Technical specification of optical transceiver module for xPON.Part 2:Optical transceiver module for EPON OLT/ONU
  • YD/T 1998.1-2009 Technical specification of single fiber Bi-directional subassembly for access network.Part 1:optical subassembly for EPON
  • YD/T 701-1993 Test method for semiconductor laser diode assembly
  • YD/T 834-1996 Test method of distributed feedback laser diodes

YD/T 2286-2011 history

  • 2011 YD/T 2286-2011 Single fiber bi-directional subassembly for 10Gbit/s EPON OLT/ONU
Single fiber bi-directional subassembly for 10Gbit/s EPON OLT/ONU



Copyright ©2024 All Rights Reserved