SY/T 0442-2010
Technical standard for internal fusion bonded epoxy coating of steel pipe (English Version)
- Standard No.
- SY/T 0442-2010
- Language
- Chinese, Available in English version
- Release Date
- 2010
- Published By
- Professional Standard - Petroleum
- Status
- 2019-03
- Replace By
- SY/T 0442-2018
- Latest
- SY/T 0442-2018
- Replace
- SY/T 0442-1997
- Scope
- This standard is applicable to the design, construction and acceptance of the anti-corrosion layer inside the sintered epoxy powder for steel pipelines transporting various oil products, natural gas, and sewage, as well as water supply and drainage steel pipelines with operating temperatures not exceeding 80°C.
SY/T 0442-2010 Referenced Document
- GB 6514 Safety code of practice for coating—Safety and ventilation for coating process*， 2023-12-28 Update
- GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting*， 2012-07-31 Update
- GB/T 1408.1 Insulating materials.Test methods for electric strength.Part 1:Test at power frequencies*， 2016-12-13 Update
- GB/T 1410 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- GB/T 16995 Determination of gel time of thermosetting powder coatings at a given temperature
- GB/T 1768 Paints and varnishes Determination of resistance to abrasion Rotating abrasive rubber wheel method
- GB/T 1771 Paints and varnishes.Determination of resistance to neutral salt spray(fog)
- GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
- GB/T 18570.9 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
- GB/T 4472 Detemination of density and relative density for chemical products*， 2011-12-30 Update
- GB/T 5210 Paints and varnishes. Pull-off test for adhesion
- GB/T 6554 Resin based reactive compounds used for electrical insulation Part 2:Methods of test:Methods for coating pourders for electrical purposes
- GB/T 8923 Rust grades and preparation grades of steel surfaces before application of paints and related products
- GB/T 9274 Paints and varnishes--Determination of resistance to liquids
- GBJ 87 Specifications for the design of noise control system in industrial enterprises
- GBZ 1 Hygienic standards for the design of industrial enterprises
- JB/T 6570 Method for determination of magnetic content of ordinary abrasives*， 2020-04-16 Update
- SY/T 0063 Standard test methods for holiday detection in pipelines coatings
- SY/T 0457 Technical standard of liquid epoxy internal coating for steel pipeline*， 2019-11-04 Update
SY/T 0442-2010 history
- 2018 SY/T 0442-2018 Technical standard for internal anti-corrosion layer of sintered epoxy powder for steel pipelines
- 2010 SY/T 0442-2010 Technical standard for internal fusion bonded epoxy coating of steel pipe
- 1997 SY/T 0442-1997 Technological standard of internal coating of fusion bonded epoxy for steel pipeline
