TB/T 3217-2009
Semi-spherical angle cock for locomotive (English Version)
- Standard No.
- TB/T 3217-2009
- Language
- Chinese, Available in English version
- Release Date
- 2009
- Published By
- Professional Standard - Railway
- Latest
- TB/T 3217-2009
- Scope
- This standard specifies the type and basic dimensions, technical requirements, test methods, inspection rules, markings, packaging, etc. of hemispherical angled plug doors for railway locomotives. This standard applies to the manufacturing and inspection of hemispherical angled plug doors with a nominal diameter of DN32 (hereinafter referred to as angled plug doors) for connecting locomotives and vehicles in train air braking systems.
TB/T 3217-2009 Referenced Document
- GB/T 10125-1997 Corrosion tests in artificial atmospheres--Salt spray tests
- GB/T 11352 Carbon steel castings for general engineering purpose
- GB/T 1176 Casting copper and copper alloys*， 2013-09-18 Update
- GB/T 1184-1996 Geometrical tolerancing--Geometrical tolerance for features without individual tolerance indications
- GB/T 12230 Specifications for stainless steel castings for general valves*， 2023-05-23 Update
- GB/T 1682 Rubber,vulcanized.Determination of low-temperature brittleness.Single test piece method*， 2014-12-31 Update
- GB/T 1690 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids*， 2011-01-14 Update
- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 21563-2008 Railway application.Rolling stock equipment.Shock and vibration tests
- GB/T 3512 Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests.Air-oven method*， 2014-12-22 Update
- GB/T 3672.1-2002 Rubber-Tolerances of products--Part 1: Dimensional tolerances
- GB/T 528 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
- GB/T 531.1 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)
- GB/T 6414-1999 Castings--System of dimensional tolerances and machining allowances
- GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
- GB/T 7759 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
- HG/T 3866-2008 Vulcanized rubber.Determinationof coefficient of cold resistance under compression
TB/T 3217-2009 history
- 2009 TB/T 3217-2009 Semi-spherical angle cock for locomotive
