GB/T 24675.6-2009
Conservation tillage equipment.Smashed straw machine (English Version)

Standard No.

GB/T 24675.6-2009

Language

Chinese, Available in English version

Release Date

2009

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2022-07

Replace By

GB/T 24675.6-2021

Latest

GB/T 24675.6-2021

Scope

This part of GB/T 24675 specifies the performance indicators, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of conservation tillage machinery straw crushing and returning machines. This part is applicable to straw crushing and returning machines mainly for crushing corn, wheat, rice, sorghum, cotton and other crop straws.

GB/T 24675.6-2009 Referenced Document

• GB 10395.1 Agricultural and forestry machinery.Safety.Part 1:General requirements
• GB 10395.5-2006 Tractors and machinery for agriculture and forestry.Technical means for ensuring safety.Part 5: Power-driven soil-working equipment
• GB 10396 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment.Safety signs and hazard pictorials.General principles
• GB/T 11357 Quality, roughness and balance of transmission pulleys*， 2020-04-28 Update
• GB/T 1144-2001 Straight-sided spline-Dimensions,tolerances and verification
• GB/T 17126.1 Agricultural tractors and machinery.Power take-off drive shafts and power input connection.Part 1:General manufacturing and safety requirements
• GB/T 275-1993 Shaft and housing fits for rolling bearings
• GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
• GB/T 3077-1999 Alloy structure steels
• GB/T 3098.1 Mechanical properties of fasteners.Blots, screws and studs*， 2011-01-10 Update
• GB/T 3098.10 Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals
• GB/T 3098.11 Mechanical properties of fasteners--Drilling screws with tapping screw thread
• GB/T 3098.12 Mechanical properties of fasteners--Cone proof load test on nuts
• GB/T 3098.13 Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
• GB/T 3098.14 Mechanical properties of fasteners-Widening test on nuts
• GB/T 3098.15 Mechanical properties of fasteners—Stainless steel nuts*， 2023-05-23 Update
• GB/T 3098.16 Mechanical properties of fasteners.Stainless steel set screws*， 2014-06-24 Update
• GB/T 3098.17 Mechanical Properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method
• GB/T 3098.18 Mechanical properties of fasteners--Blind rivets testing
• GB/T 3098.19 Mechanical properties of fasteners-Blind rivets with break pull mandrel
• GB/T 3098.2 Mechanical properties of fasteners.Nuts*， 2015-12-10 Update
• GB/T 3098.20 Mechanical properties of fasteners-Wing nuts with specified proof torque
• GB/T 3098.21 Mechanical properties of fasteners.Stainless steel tapping screws*， 2014-06-24 Update
• GB/T 3098.22 Mechanical properties of fasteners made of the fine grain non-heat treatment steel.Bolts,screws and studs
• GB/T 3098.23 Mechanical properties of fasteners—M42～M72 bolts, screws and studs*， 2020-03-31 Update
• GB/T 3098.24 Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications*， 2020-11-19 Update
• GB/T 3098.25 Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners*， 2020-11-19 Update
• GB/T 3098.26 Mechanical properties of fasteners—Flat washers*， 2021-12-31 Update
• GB/T 3098.3 Mechanical properties of fasteners.Set screws*， 2016-02-24 Update
• GB/T 3098.4 Mechanical properties of fasteners-Nuts-Fine pitch thread
• GB/T 3098.5 Mechanical properties of fasteners.Tapping screws*， 2016-02-24 Update
• GB/T 3098.6 Mechanical properties of fasteners—Stainless steel bolts，screws and studs*， 2023-05-23 Update
• GB/T 3098.7 Mechanical properties of fasteners-Thread rolling screws
• GB/T 3098.8 Mechanical properties of fasteners.Parts for bolted connections for use at temperatures from -200℃～+700℃*， 2011-01-10 Update
• GB/T 3098.9 Mechanical properties of fasteners—Prevailing torque type steel nuts*， 2020-03-31 Update
• GB/T 3478.1 Straight cylindrical involute splines.Metric module,side fit.Part 1:Generalities
• GB/T 5263 Agricultural tractors and machinery.Guards for power take-off drive shafts.Strength and wear tests and acceptance criteria
• GB/T 699-1999 Quality carbon structural steels
• GB/T 9239.1-2006 Mechanical vibration. Balance quality requirements for rotors in a constant(rigid) state. Part 1: Specification and verification of balance tolerances
• GB/T 9439-1988 Grey iron castings
• GB/T 9480 Tractors machinery for agriculture and forestry,powered lawn and garden equipment--Operator's manuals--Content and presentation
• JB/T 5673 Agriculture and forestry tractors and machinery.General requirements of painting*， 2015-10-10 Update
• JB/T 8574 Agriculture machinery and implements.Method of type designation*， 2013-04-25 Update

GB/T 24675.6-2009 history

• 2021 GB/T 24675.6-2021 Conservation tillage equipment—Part 6:Smashed straw machine
• 2009 GB/T 24675.6-2009 Conservation tillage equipment.Smashed straw machine

GB/T 24675.6-2009 -All Parts