This standard specifies the product classification, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of high-purity insulating wood pulp. This standard is applicable to the production of various types of capacitor pulp, and is also applicable to the production of high-voltage insulating pulp from 110kV to 330kV and above.
GB/T 13505-2007 Referenced Document
GB/T 10739 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp specimens*, 2023-12-28 Update
GB/T 1545.1 Paper,board and pulp-Determination of acidity or alkalinity
GB/T 1546 Pulp—Determination of Kappa number*, 2018-12-28 Update
GB/T 1548 Pulps—Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution*, 2016-12-13 Update
GB/T 2678.2 Paper, board and pulps—Determination of water-soluble chlorides*, 2021-08-20 Update
GB/T 2678.5 Paper, board and pulp--Determination of water soluble chlorides (AgNo3 method)
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*, 2013-02-15 Update
GB/T 3332 Pulps-Determination of beating degree(Schopper-Riegler method)
GB/T 742 Fibrous raw material, pulp, paper and board—Determination of residue(ash) on ignition at 575℃ and 900℃*, 2018-12-28 Update
GB/T 7977 Paper,board and pulps.Determination of conductivity of aqueous extracts
GB/T 7979 Pulp—Determination of dichloromethane soluble matter*, 2020-07-21 Update
GB/T 8943.2 Paper, board and pulp.Determination of iron*, 2008-01-04 Update
GB/T 8944.1 Pulps.Determination of saleable mass in lots.Part 1:Pulp baled in sheet form or pulps(such as flash-dried pulps)baled in slabs*, 2008-08-19 Update
QB/T 3702 Laboratory beating Valley (VALLEY) beater method
QB/T 3703 Pulp Laboratory Sheet Preparation Conventional Sheet Former Method
QB/T 3704 Methods for determination of physical properties of paper sheets in pulp laboratories