This standard specifies the calculation of the hoop stress on the drum wall when the centrifuge drum rotates, the selection of various coefficients, the strength verification method of the drum, the principles of applying the finite element method to calculate the stress of the centrifuge drum, and the verification method of fatigue strength. . This standard applies to centrifuge drums with uniform wall thickness (the main shaft is arranged horizontally or vertically). The drum wall can be perforated or not, and the drum can be lined, screened or without lining and screen: the material of the drum must be a tough metal material, and the operating temperature and medium resistance have been taken into consideration when selecting the material. Material effects. This standard does not apply to centrifuge drums under the following conditions: a) The ratio of drum wall thickness to radius δ/r1>0.1; b) The kinetic energy of the loaded drum is less than 750J; c) Household dehydrators driven by electric motors; d ) The peripheral speed of the drum is greater than 300m/s; e) High-speed centrifuge specially used in the nuclear industry.
JB/T 8051-2008 Referenced Document
GB/T 228-2002 Metallic materials--Tensile testing at ambient temperature
GB/T 3075-1982 Method of axial force controlled fatigue testing of metals
JB 4732-1995 Steel pressure vessel - Stress analysis design standard
JB/T 9095-1999 Conventional nondestructive testing methods for forging and weldment of centrifuge and separator.Technical specification
JB/T 8051-2008 history
2008JB/T 8051-2008 Standard of strength calculation for centrifugal drum