SAE AMS2632A-1995 PDF

Scope: This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross sectional-thickness of 0.02 to 0.5 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials. This process has been used typically for locating and defining internal defects such as cracks, voids, laminations, and other structural discontinuities which may or may not be exposed to the surface, but usage is not limited to such applications.

SAE AMS2632A-1995 Referenced Document

ASME B46.1-1995 Surface Texture, Surface Roughness Waviness and Lay (B46.1 - 1995)*， 1995-04-18 Update
ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments*， 2001-02-10 Update
SAE AMS5070 CARBON STEEL .18 - .23 Carbon
SAE AMS5070G-1990 Steel Bars and Forgings (0.18 - 0.23C) (SAE 1022)
SAE J300 Engine Oil Viscosity Classification*， 2021-04-01 Update

2022 SAE AMS2632C-2022 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
2018 SAE AMS2632B-2018 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
2008 SAE AMS2632A-2008 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
1995 SAE AMS2632A-1995 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
1991 SAE AMS2632-1991 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner
1974 SAE AMS2632-1974 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner