SAE AMS2632-1974
ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner

Standard No.

SAE AMS2632-1974

Release Date

1974

Published By

SAE - SAE International

Status

Be replaced

Replace By

SAE AMS2632-1991

Latest

SAE AMS2632C-2022

Scope

Purpose: This specification covers the procedure for ultrasonic inspection of flat@ contoured@ and cylindrical products having a cross sectional thickness of 0.02 ?C 0.5 in. (0.5 ?C 13mm). This specification does not apply inspection of composite materials. Application: Primarily for locating and defining internal defects such as cracks@ voids@ laminations@ and other structural discontinuities which may or may not be exposed to the surface.

SAE AMS2632-1974 history

• 2022 SAE AMS2632C-2022 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
• 2018 SAE AMS2632B-2018 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
• 2008 SAE AMS2632A-2008 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
• 1995 SAE AMS2632A-1995 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
• 1991 SAE AMS2632-1991 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner
• 1974 SAE AMS2632-1974 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner