Purpose This specification covers the procedure for ultrasonic inspection of flat@ contoured@ round and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials. Application This process has been used typically for locating and defining internal defects@ such as cracks@ voids@ laminations@ and other structural discontinuities@ which may or may not be exposed to the surface@ but usage is not limited to such applications.
SAE AMS2632B-2018 history
2022SAE AMS2632C-2022 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
2018SAE AMS2632B-2018 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
2008SAE AMS2632A-2008 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
1995SAE AMS2632A-1995 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
1991SAE AMS2632-1991 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner
1974SAE AMS2632-1974 ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner