GB/T 1962.1-2001
The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement (English Version)
- Standard No.
- GB/T 1962.1-2001
- Language
- Chinese, Available in English version
- Release Date
- 2001
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2017-01
- Replace By
- GB/T 1962.1-2015
- Latest
- GB/T 1962.1-2015
- Replace
- GB 1962-1995
- Scope
- This standard specifies the dimensions, requirements and test methods for general requirements of 6% (Luer) conical connectors for syringes, injection needles and other medical devices. This standard applies to the general requirements for 6% (Luer) conical joints of rigid and semi-rigid syringes, injection needles and other medical devices (hereinafter referred to as conical joints). Not suitable for 6% (Luer) conical fittings made of softer or elastomeric materials. NOTE: While it is somewhat difficult to precisely define the properties of rigid or semi-rigid materials, glass and metals are often considered typical rigid materials. In contrast, many plastics are considered semi-rigid, although wall thickness is an important factor in part rigidity.
GB/T 1962.1-2001 history
- 2015 GB/T 1962.1-2015 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment.Part 1:General requirement
- 2001 GB/T 1962.1-2001 The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement
- 0000 GB 1962-1995
