SAE AMS3346D-2013
Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer

Standard No.

SAE AMS3346D-2013

Release Date

2013

Published By

SAE - SAE International

Status

Be replaced

Replace By

SAE AMS3346G-2013

Latest

SAE AMS3346H-2019

Scope

Form: This specification covers a silicone rubber in the form of sheet@ strip@ tubing@ molded shapes@ and extrusions. Application: Primarily for rubber-like parts required to operate or seal at temperatures from -90??o +205??(-130??o +400 0 F)@ compounded especially for high strength. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. The material is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.

SAE AMS3346D-2013 history

• 2019 SAE AMS3346H-2019 Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
• 2013 SAE AMS3346G-2013 Silicone Rubber, 1000 psi (6.89 MPa) Minimum Tensile Strength, 55-65 Durometer
• 2013 SAE AMS3346D-2013 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 2001 SAE AMS3346F-2001 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1996 SAE AMS3346F-1996 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1992 SAE AMS3346E-1992 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1983 SAE AMS3346D-1983 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 55 - 65
• 1976 SAE AMS3346C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 55-65
• 1965 SAE AMS3346B-1965 SILICONE RUBBER 1000 psi 55 - 65
• 1962 SAE AMS3346A-1962 SILICONE RUBBER 1000 psi (55 - 65)
• 1956 SAE AMS3346-1956 SILICONE RUBBER 1000 psi (55 - 65)