SAE AMS3346D-1983
SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 55 - 65

Standard No.

SAE AMS3346D-1983

Release Date

1983

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced 2013-06

Replace By

SAE AMS3346E-1992

Latest

SAE AMS3346H-2019

Scope

This specification covers a silicone rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.

SAE AMS3346D-1983 history

• 2019 SAE AMS3346H-2019 Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
• 2013 SAE AMS3346G-2013 Silicone Rubber, 1000 psi (6.89 MPa) Minimum Tensile Strength, 55-65 Durometer
• 2013 SAE AMS3346D-2013 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 2001 SAE AMS3346F-2001 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1996 SAE AMS3346F-1996 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1992 SAE AMS3346E-1992 Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
• 1983 SAE AMS3346D-1983 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 55 - 65
• 1976 SAE AMS3346C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 55-65
• 1965 SAE AMS3346B-1965 SILICONE RUBBER 1000 psi 55 - 65
• 1962 SAE AMS3346A-1962 SILICONE RUBBER 1000 psi (55 - 65)
• 1956 SAE AMS3346-1956 SILICONE RUBBER 1000 psi (55 - 65)