GB/T 40169-2021
Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD) (English Version)
- Standard No.
- GB/T 40169-2021
- Language
- Chinese, Available in English version
- Release Date
- 2021
- Published By
- 国家市场监督管理总局、中国国家标准化管理委员会
- Latest
- GB/T 40169-2021
- Scope
- This standard specifies the symbols, codes and abbreviations, classification, naming, materials, requirements, test methods, Inspection rules, marking, packaging, transportation and storage. This standard is applicable to PE-UHMW sheets and PE-HD sheets with a thickness ranging from 10 mm to 200 mm. This standard does not apply to PE-UHMW sheets and PE-HD sheets containing fillers and reinforcing materials.
GB/T 40169-2021 Referenced Document
- GB/T 1033.1 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
- GB/T 1033.2 Plastics.Methods for determining the density of non-cellular plastics.Part 2:Density gradient column method
- GB/T 1040.2 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics*， 2022-07-11 Update
- GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
- GB/T 1845.1 Plastics—Polyethylene(PE) moulding and extrusion materials—Part 1: Designation system and basis for specifications
- GB/T 21461.1 Plastic ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and classification basis*， 2023-11-27 Update
- GB/T 21461.2-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
- GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
- GB/T 3398.1 Plastics.Determination of hardness.Part 1:Ball indentation method
- GB/T 3682.1 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method
- GB/T 3960 Plastics—Test method for friction and wear by sliding
- GB/T 9345.1-2008 Plastics.Determination of ash.Part1:General methods
- ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
- SH/T 1818 Test method for abrasion of plastic ultra-high molecular weight polyethylene mortar
GB/T 40169-2021 history
- 2021 GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)
