GB/T 42163.1-2022
Monomer casting polyamide pulleys—Part 1：Elevator pulleys (English Version)
- Standard No.
- GB/T 42163.1-2022
- Language
- Chinese, Available in English version
- Release Date
- 2022
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 42163.1-2022
- Scope
- This document specifies the material, structure type and basic parameters, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of single cast polyamide elevator pulleys (hereinafter referred to as pulleys). This document is applicable to elevator pulleys made of caprolactam as raw material through casting and molding.
GB/T 42163.1-2022 Referenced Document
- GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
- GB/T 1034-2008 Plastics.Determination of water absorption
- GB/T 1036 Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer
- GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
- GB/T 1041-2008 Plastics.Determination of compressive properties
- GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
- GB/T 13254 Caprolactam for industrial use
- GB/T 14486-2008 Dimensional tolerances for moulded plastic parts
- GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite
- GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps
- GB/T 2406.2-2009 Plastics.Determination of burning behaviour by oxygen index.Part 2:Ambient-temperature test
- GB/T 2423.34-2012 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test
- GB/T 2423.50-2012 Environmental testing.Part 2:Test methods.Test Cy:Damp heat, steady state, accelerated test primarily intended for components
- GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
- GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
- GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method
- GB/T 3960 Plastics—Test method for friction and wear by sliding
- GB/T 9341-2008 Plastic.Determination of flexural properties
- JB/T 5936-2018 General technical conditions for machined parts of engineering machinery
- JB/T 5947-2018 Engineering machinery General technical specifications for packaging
GB/T 42163.1-2022 history
- 2022 GB/T 42163.1-2022 Monomer casting polyamide pulleys—Part 1：Elevator pulleys
