HJ 254-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Electrolytic aluminum and aluminum carbon industry (English Version)
This standard stipulates the working procedures and overall requirements for the acceptance of environmental protection facilities upon completion of electrolytic aluminum and aluminum carbon industrial construction projects, and proposes the initiation of acceptance, acceptance self-inspection, preparation of acceptance monitoring plan, implementation of acceptance monitoring and inspection, and preparation of acceptance monitoring report ( table) technical requirements. This standard is applicable to the acceptance of environmental protection facilities upon completion of electrolytic aluminum and aluminum carbon industrial construction projects. In electrolytic aluminum and aluminum carbon industrial construction projects, the acceptance of environmental protection facilities upon completion of self-provided thermal power generating units (factories) shall be carried out in accordance with HJ/T255.
HJ 254-2021 Referenced Document
GB 12348 Emission standard for industrial enterprises noise at boundary
GB 16297 Comprehensive emission standard of air pollutants
GB 18597 Standard for pollution control on hazardous waste storage*, 2023-01-20 Update
GB 18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
GB 25465 "Aluminum Industry Pollutant Discharge Standard" Amendment No. 1
GB 34330 Identification standards for solid wastes Generalrules
GB 5085.7 General Rules for Hazardous Waste Identification Standards
GB/T 14581 Water quality. Guidance on sampling techniques from lakes, natural and man-made
GB/T 16157 "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
HJ 164 Technical Specifications for Groundwater Environmental Monitoring
HJ 194 Technical specification for manual monitoring of ambient air quality "Revision No. 1"
HJ 353 Technical specifications for the installation of online monitoring systems for water pollution sources (CODCr, NH3-N, etc.)
HJ 354 Technical specification for acceptance of water pollution source online monitoring system (CODCr, NH3-N, etc.)
HJ 75 Specifications for continuous emissions monitoring of SO2, NOX, andparticulate matter in the flue gas emitted fromstationarysources
HJ 76 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ/T 166 Technical specification for soil environmental monitoring
HJ/T 255 Technical guidelines for environmental protection in power plant capital construction project for check and accept of completed project
HJ/T 52 Water quality.Guidance on sampling techniques of rivers
HJ/T 55 Technical guidelines for fugitive emission monitoring of air pollutants
HJ/T 91 Technical Specifications Requirements for Monitoring of Surface Water and Waste Water
HJ/T 92 Technical requirements for monitoring of total amount of pollutants in waste water
HJ 254-2021 history
2021HJ 254-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Electrolytic aluminum and aluminum carbon industry
2006HJ/T 254-2006 Technical guidelines for environmental protection in electrolyzing aluminum capital construction project for check and accept of completed project