IEC 60269-2:2016 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
Fuses for use by authorized persons are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons: Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system) Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system) Fuse system C: Fuse-rails (NH fuse system) Fuse system D: Fuse-bases for busbar mounting (NH fuse system) Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system) Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system) Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system) Fuse system H: Fuses with fuse-links having "gD" and "gN" characteristic (class J class L and class T time delay and non time delay fuse types) Fuse system I: gU fuse-links with wedge tightening contacts Fuse system J: Fuses with fuse-links having "gD class CC" and "gN class CC" characteristics (class CC time delay and non-time delay fuse types) Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1250 A up to 4800 A (master fuse-links) NOTE The above-mentioned fuse systems are standardized systems in respect to their safety aspects. The National Committees can select from the examples of standardized fuses one or more systems for their own standards.
IEC 60269-2:2016 Referenced Document
IEC 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60269-1:2006 Low-voltage fuses - Part 1: General requirements
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm<(hoch)2> up to 35 mm<(hoch)2>
IEC 60999-2:2003 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors from 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included)
ISO 6988:1985 Metallic and other non organic coatings; Sulfur dioxide test with general condensation of moisture
IEC 60269-2:2016 history
2016IEC 60269-2:2013/AMD1:2016 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K; Amendment 1
2016IEC 60269-2:2016 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
2013IEC 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
2010IEC 60269-2:2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J
2006IEC 60269-2:2006 Low-voltage fuses - Part 2 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I
1970IEC 60269-2:1986/AMD2:2001 Amendment 2 - Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
1996IEC 60269-2:1986/COR1:1996 Corrigendum 1 — Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
1970IEC 60269-2:1986/AMD1:1995 Amendment 1 - Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
1986IEC 60269-2:1986 Low-voltage fuses. Part 2 : Supplementary requirements for fuses for use by authorized persons
1970IEC 60269-2:1973 Low-voltage fuses - Part 2: Supplementary requirements for fuses for industrial applications