This standard specifies the terms and definitions, classification and naming, conditions of use, materials, supporting devices, technical requirements, test methods, inspection rules and markings, packaging, transportation and storage of touch faucets. This standard applies to touch-controlled faucets installed at the end of cold and hot water supply pipelines in buildings, with a working pressure (static pressure) not greater than 0.6 MPa and a water supply temperature of 5°C to 90°C.
QB/T 5003-2016 Referenced Document
GB 14536.9 Automatic electrical controls for household and similar use.Particular requirements for electrically operated water valves,including mechanical requirements
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus.Part 1:Emission*， 2018-05-14 Update
GB 4343.2 Electromagnetic compatibility.Requirements for household appliances,electric tools and similar apparatus.Part 2:Immunity
GB 4706.1 Household and similar electrical appliances-Safety Part 1:General requirements
GB/T 10125-2012 Corrosion tests in artificial atmospheres.Salt spray tests
GB/T 23447 Sanitary Ware Shower Head*， 2023-08-06 Update
GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9286-1998 Paints and varnishes--Cross cut test for films