ISO 18796-1:2018 Petroleum, petrochemicals and natural gas industries - Internal coating and lining of carbon steel process vessels - Part 1: Technical requirements
International Organization for Standardization (ISO)
Latest
ISO 18796-1:2018
Scope
This document specifies the minimum technical requirements for surface preparation, materials, application, inspection and testing of internal coating and lining systems that are intended to be applied on internal surfaces of process vessels that are subject to marked pressure/temperature changes and/ or potentially corrosive conditions or processes and aggressive chemicals, used in the oil and gas industry.
This document covers both new construction and maintenance works of process vessels as well as the repair of defective and deteriorated coating and lining systems.
This document also provides the minimum requirements for the coated and lined samples and the criteria for their approval.
ISO 18796-1:2018 Referenced Document
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor*, 2024-04-20 Update
ASTM D4060-14 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser*, 2024-04-20 Update
ASTM D4414-95 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D610-08 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces*, 2024-04-20 Update
ASTM D714-02 Standard Test Method for Evaluating Degree of Blistering of Paints*, 2024-04-20 Update
ASTM F21-14 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test*, 2024-04-20 Update
ISO 10474:2013 Steel and steel products - Inspection documents
ISO 11124-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
ISO 11124-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit
ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
ISO 2812-1:2017 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 2812-2:2007 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4:2017 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
ISO 2812-5:2018 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
ISO 3233-1:2013 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion
ISO 7027:1999 Water quality - Determination of turbidity
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
ISO 18796-1:2018 history
2018ISO 18796-1:2018 Petroleum, petrochemicals and natural gas industries - Internal coating and lining of carbon steel process vessels - Part 1: Technical requirements