ISO 11124-2:2018
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
- Standard No.
- ISO 11124-2:2018
- Release Date
- 2018
- Published By
- International Organization for Standardization (ISO)
- Latest
- ISO 11124-2:2018
- Scope
- This document specifies requirements for 12 grades of chilled-iron grit abrasives, as supplied for blastcleaning processes. It specifies ranges of particle sizes, together with corresponding grade designations. Values are specified for hardness, density, defect/structural requirements and chemical composition. The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use. Test methods for metallic blast-cleaning abrasives are given in the various parts of ISO 11125. Chilled-iron grit abrasives are used in both static and site blasting equipment. They are most often selected where a facility exists for recovery and re-use of the abrasive. NOTE Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504-2.
ISO 11124-2:2018 Referenced Document
- ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
- ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
- ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
- ISO 11125-4:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density
- ISO 11125-5:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure
- ISO 11125-6:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
- ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
- ISO 9556:1989 Steel and iron; determination of total carbon content; infrared absorption method after combustion in an induction furnace
ISO 11124-2:2018 history
- 2018 ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
- 1993 ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
