DIN SPEC 25714:2017-09
Basalt fibers - Technical specification; Text in German and English

Standard No.
DIN SPEC 25714:2017-09
Release Date
2017
Published By
German Institute for Standardization
Latest
DIN SPEC 25714:2017-09
Scope
This DIN SPEC in accordance with the PAS procedure was developed within a workshop set up on a temporary basis. The document was developed and approved by authors named in the foreword. This DIN SPEC specifies a designation system, test criteria, test methods and requirements for the marking, packaging and storage of rovings that are produced from molten basalt in a (thermal) melt-spinning process and that are used in the production of textiles as reinforcing fibres for use with plastics, hydraulic dies or in other applications. Textured yarns, yarns from staple fibres and pre-impregnated rovings are not covered in this DIN SPEC.

DIN SPEC 25714:2017-09 Referenced Document

  • DIN EN 10204:2005 Metallic products - Types of inspection documents; German version EN 10204:2004
  • DIN EN 15422:2008 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes; German version EN 15422:2008
  • DIN EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
  • DIN EN ISO 1889:2009 Reinforcement yarns - Determination of linear density (ISO 1889:2009); English version of DIN EN ISO 1889:2009-10
  • DIN EN ISO 3344:1997 Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997
  • DIN EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013); Trilingual version EN ISO 472:2013
  • DIN EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
  • GB/T 25045-2010 Basalt fiber roving
  • ISO 1887:2014 Textile glass - Determination of combustible-matter content
  • ISO 1888:2006 Textile glass - Staple fibres or filaments - Determination of average diameter
  • ISO 2859-10:2006 Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
  • ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 2859-2:1985 Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
  • ISO 2859-3:2005 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
  • ISO 2859-4:2002 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
  • ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 3341:2000 Textile glass - Yarns - Determination of breaking force and breaking elongation
  • ISO 3951-1:2013 Sampling procedures for inspection by variables.Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
  • ISO 3951-2:2013 Sampling procedures for inspection by variables. Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
  • ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 3951-4:2011 Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels
  • ISO 3951-5:2006 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)

DIN SPEC 25714:2017-09 history

Basalt fibers - Technical specification; Text in German and English


Copyright ©2024 All Rights Reserved