EN 16682:2017
Conservation of cultural heritage - Methods of measurement of moisture content@ or water content@ in materials constituting immovable cultural heritage

Standard No.
EN 16682:2017
Release Date
2017
Published By
European Committee for Standardization (CEN)
Latest
EN 16682:2017
Replace
FprEN 16682-2016
Scope
This European Standard is aimed to inform and assist users in the choice and use of the most appropriate method to obtain reliable measurements of the moisture content, or water content, in wood and masonry (including brickwork, stonework, concrete, gypsum, mortars, etc.) in the specific case of the built cultural heritage. It provides a basic framework to take and interpret this kind of measurements on the above cultural heritage materials that have undergone weathering, pest attack, salt migration or other transformations over time. It specifies four absolute methods (i.e. gravimetric, Karl Fischer titration, azeotropic distillation and calcium carbide); explains their characteristics, pros and cons, and gives specifications for the transformation of readings into the same unit to make measurements taken with different methods comparable. It specifies the three principal relative methods (i.e. electrical resistance, capacitance, and relative humidity in equilibrium with the material), pointing out their characteristics and uncertainties when used in the field of cultural heritage. In addition, it provides an informative overview of ten other relative methods, their characteristics, pros and cons. It gives specifications for the calibration of the various methods. It also compares the above methods in relation to their accuracy, sampling requirement, sample size, laboratory or field use, and other problems encountered in the field of cultural heritage to prevent instrument misuse, reduce uncertainties and avoid reading misinterpretation.

EN 16682:2017 Referenced Document

  • ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass*2024-04-20 Update
  • ASTM D4442-07 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials*2024-04-20 Update
  • ASTM D4944-04 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
  • EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density*2024-04-20 Update
  • EN 13183-1:2002 Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method
  • EN 13183-2:2002 Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method
  • EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
  • EN 15757:2010 Conservation of Cultural Property - Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials
  • EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • EN 15898:2011 Conservation of cultural property - Main general terms and definitions*2024-04-20 Update
  • EN 16085:2012 Conservation of Cultural property - Methodology for sampling from materials of cultural property - General rules
  • EN 16096:2012 Conservation of cultural property - Condition survey and report of built cultural heritage
  • EN 16242:2012 Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property*2024-04-20 Update
  • EN 322:1993 Wood-based panels; determination of moisture content
  • EN 455-1:2000 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes*2024-04-20 Update
  • EN 772-10:1999 Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
  • EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
  • EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
  • EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
  • EN ISO 13130:2011 Laboratory glassware - Desiccators (ISO 13130:2011)
  • EN ISO 14911:1999 Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography - Method for Water and Waste Water ISO 14911:1998
  • EN ISO 15512:2016 Plastics - Determination of water content
  • EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (Incorporates Amendment A1: 2018)
  • EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
  • ISO ISO IEC 27001-2013 cor2-2015 technical errata*2024-04-20 Update
  • ISO 1026:1982 Fruit and vegetable products; Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation
  • ISO 760:1978 Determination of water; Karl Fischer method (General method)
  • ISO Guide 34:2009 General requirements for the competence of reference material producers
  • ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

EN 16682:2017 history

  • 2017 EN 16682:2017 Conservation of cultural heritage - Methods of measurement of moisture content@ or water content@ in materials constituting immovable cultural heritage



Copyright ©2024 All Rights Reserved