1.1 General - This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3. 1.2 Exclusions - This European Standard does not apply to the following which are intended for a different use: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361; - revolving doors of any size; - railway barriers; - barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation. The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive. 1.3 Specific applications - This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.
EN 13241:2003+A2:2016 Referenced Document
EN 12424:2000 Industrial, commercial and garage doors and gates - Resistance to wind load - Classification
EN 12425:2000 Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification
EN 12426:2000 Industrial, commercial and garage doors and gates - Air permeability - Classification
EN 12427:2000 Industrial, commercial and garage doors and gates - Air permeability - Test method
EN 12428:2013 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
EN 12433-1:1999 Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
EN 12433-2:1999 Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors
EN 12444:2000 Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation*， 2024-04-20 Update
EN 12445:2000 Industrial, Commercial and Garage Doors and Gates - Safety in Use of Power Operated Doors - Test Methods*， 2024-04-20 Update
EN 12453:2000 Industrial, Commercial and Garage Doors and Gates - Safety in Use of Power Operated Doors - Requirements*， 2024-04-20 Update
EN 12489:2000 Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method
EN 12604:2000 Industrial, Commercial and Garage Doors and Gates - Mechanical Aspects - Requirements
EN 12605:2000 Industrial, Commercial and Garage Doors and Gates - Mechanical Aspects - Test Methods
EN 12635:2002 Industrial, commercial and garage doors and gates - Installation and use (Incorporates Amendment A1: 2008)
EN 12978:2003 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods (Incorporates Amendment A1: 2009)
EN 16034:2014 Pedestrian doorsets@ industrial@ commercial@ garage doors and openable windows - Product standard@ performance characteristics - Fire resisting and/or smoke control characteristics
EN 16361:2013 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics*， 2024-04-20 Update
EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
EN 60204-1:1997 Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements (Remains Current)
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (Incorporates Amendment A1: 2011)
EN ISO 12567-1:2010 Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors
EN ISO 140-3:1995 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 3: Laboratory Measurements of Airborne Sound Insulation of Building Elements Includes Amendment A1:2004; ISO 140-3:1995 + A1:2004
EN ISO 717-1:2013 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation