ASTM D6856/D6856M-03(2016)
Standard Guide for Testing Fabric-Reinforced &x201c;Textile&x201d; Composite Materials

Standard No.
ASTM D6856/D6856M-03(2016)
Release Date
2003
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D6856/D6856M-23
Latest
ASTM D6856/D6856M-23
Scope

4.1 This guide is intended to serve as a reference for the testing of textile composite materials.

1.1 This guide is applicable to the testing of textile composites fabricated using fabric preforms, such as weaves, braids, stitched preforms, and so forth, as the reinforcement. The purpose of this guide is to:

1.1.1 Ensure that proper consideration is given to the unique characteristics of these materials in testing.

1.1.2 Assist the user in selecting the best currently available ASTM test method for the measurement of commonly evaluated material properties for this class of materials.

1.2 Areas where current ASTM test methods do not meet the needs for testing of textile composites are indicated.

1.3 It is not the intent of this guide to cover all test methods which could possibly be used for textile composites. Only the most commonly used and most applicable standards are included.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

ASTM D6856/D6856M-03(2016) Referenced Document

  • ASTM D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  • ASTM D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
  • ASTM D3171 Standard Test Methods for Constituent Content of Composite Materials
  • ASTM D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
  • ASTM D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
  • ASTM D3518/D3518M Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ± 45o Laminate
  • ASTM D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
  • ASTM D3878 Standard Terminology Composite Materials
  • ASTM D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
  • ASTM D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
  • ASTM D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
  • ASTM D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • ASTM D5766/D5766M Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
  • ASTM D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • ASTM D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
  • ASTM D6415 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
  • ASTM D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
  • ASTM D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
  • ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials*， 2024-04-20 Update
  • ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D883 Standard Terminology Relating to Plastics
  • ASTM E122 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
  • ASTM E1237 Standard Guide for Installing Bonded Resistance Strain Gages
  • ASTM E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
  • ASTM E456 Standard Terminology for Relating to Quality and Statistics
  • ASTM E6 Standard Terminology Relating to Methods of Mechanical Testing

ASTM D6856/D6856M-03(2016) history

Standard Guide for Testing Fabric-Reinforced &x201c;Textile&x201d; Composite Materials


Copyright ©2024 All Rights Reserved