GB/T 13823.3-1992
Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation (English Version)

Standard No.

GB/T 13823.3-1992

Language

Chinese, Available in English version

Release Date

1992

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2007-12

Replace By

GB/T 20485.21-2007

Latest

GB/T 20485.21-2007

Scope

This standard specifies the basic requirements for the secondary vibration calibration of vibration and shock sensors, the instruments and equipment used and the operation methods. This standard applies to linear motion sensors, and its scope of application is as follows: Frequency range: 20~5000Hz. Dynamic range (depending on vibration frequency): Displacement: 0.1μm～10mm; Speed: 1mm/s～10m/s; Acceleration: 10～1000m/s². Error limit: For displacement and speed sensors: (20~1000Hz) is ±4% of reading; For acceleration sensors: (20~1000Hz) is ±2% of reading, (20~2000Hz) is ±3% of reading, ( 20～5000Hz) is ±5% of the reading.

GB/T 13823.3-1992 history

• 2007 GB/T 20485.21-2007 Methods for the calibration of vibration and shock transducers.Part 21:Vibration calibration by comparison to a reference transducer
• 1992 GB/T 13823.3-1992 Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation

GB/T 13823.3-1992 Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation was changed to GB/T 20485.21-2007 Methods for the calibration of vibration and shock transducers.Part 21:Vibration calibration by comparison to a reference transducer.

GB/T 13823.3-1992 -All Parts