GB/T 19355.1-2016 Guidelines and recommendations for corrosion protection of steel structures with zinc cladding - Part 1: Basic principles of design and corrosion protection (English Version)
This part of GB/T 19355 provides design guidelines and suggestions for anti-corrosion zinc coatings and corrosion resistance grades used for structural parts exposed to different environments. The initial protection involves the feasible standard process; ---design requirements; ---use environment. This section applies to the zinc coating obtained by the following processes, a) hot-dip galvanized layer (hot-dip galvanized parts); b) hot-dip galvanized layer (continuously hot-dip galvanized steel sheet); d) thermally sprayed coatings; e) "mechanical coatings; correction" electrogalvanized coatings. These guidelines and recommendations do not deal with corrosion protection maintenance of galvanized steel in service. Guidance on this subject can be found in ISO 12944-5 and ISO 12944-5. 8. Note: Various product-related standards (such as nails, fasteners, ductile iron pipes, etc.) have specific requirements for galvanized coating systems, and these requirements will exceed the generality proposed in this part of this standard. Guidelines. These product-specific requirements shall take precedence over the general guidelines.
GB/T 19355.1-2016 Referenced Document
EN 10240 Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
EN 10346 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 13438 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
EN 13811 Sherardizing - Zinc diffusion coatings on ferrous products - Specification
EN 15520 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings
GB/T 10123 Corrosion of metals and alloys—Vocabulary*, 2022-04-15 Update
GB/T 12334 Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness
GB/T 13912 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods*, 2020-06-02 Update
GB/T 19292.1 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1: Classification, determination and estimation*, 2018-05-14 Update
GB/T 19292.2 Corrosion of metals and alloys.Corrosivity of atmospheres.Part 2: Guiding values for the corrosivity categories*, 2018-05-14 Update
GB/T 19292.4 Corrosion of metals and alloys.Corrosivity of atmospheres.Part 4:Determination of corrosion rate of standard specimens for the evaluation of corrosivity*, 2018-05-14 Update
GB/T 19355.1 Guidelines and recommendations for corrosion protection of steel structures with zinc cladding - Part 1: Basic principles of design and corrosion protection
GB/T 19355.2 Zinc coatings.Guidelines and recommendations for the protection against corrosion of iron and steel in structures.Part 2: Hot dip galvanizing
GB/T 19355.3 Guidelines and recommendations for corrosion protection of steel structures with zinc cladding - Part 3: Powder sherardizing
GB/T 24513.1 Corrosion of metals and alloys-Classification of low corrosivity of indoor atmospheres-Part 1:Determination and estimation of indoor corrosivity
GB/T 26106 Mechanically deposited coatings of zinc.Specification and test methods
GB/T 9793 Technical raying--Metallic and other inorganic coatings--Zinc,aluminum and their alloys
GB/T 9799 Metallic and other inorganic coatings.Electroplated coatings of zinc with supplementary treatments on iron or steel
ISO 12944-5 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems*, 2019-09-27 Update
ISO 12944-8 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance*, 2017-11-01 Update
ISO 2081:2008 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
ISO 9224:1992 Corrosion of metals and alloys; corrosivity of atmospheres; guiding values for the corrosivity categories
GB/T 19355.1-2016 history
2016GB/T 19355.1-2016 Guidelines and recommendations for corrosion protection of steel structures with zinc cladding - Part 1: Basic principles of design and corrosion protection
2003GB/T 19355-2003 Protection against corrosion of iron and steel in structures-Zinc and aluminum coatings-Guidelines