ASTM E2789-10(2015)
Standard Guide for Fretting Fatigue Testing

Standard No.
ASTM E2789-10(2015)
Release Date
2010
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM E2789-10(2021)
Latest
ASTM E2789-10(2021)
Scope

4.1 Fretting fatigue tests are used to determine the effects of several fretting parameters on the fatigue lives of metallic materials. Some of these parameters

1.1 This guide defines terminology and covers general requirements for conducting fretting fatigue tests and reporting the results. It describes the general types of fretting fatigue tests and provides some suggestions on developing and conducting fretting fatigue test programs.

1.2 Fretting fatigue tests are designed to determine the effects of mechanical and environmental parameters on the fretting fatigue behavior of metallic materials. This guide is not intended to establish preference of one apparatus or specimen design over others, but will establish guidelines for adherence in the design, calibration, and use of fretting fatigue apparatus and recommend the means to collect, record, and reporting of the data.

1.3 The number of cycles to form a fretting fatigue crack is dependent on both the material of the fatigue specimen and fretting pad, the geometry of contact between the two, and the method by which the loading and displacement are imposed. Similar to wear behavior of materials, it is important to consider fretting fatigue as a system response, instead of a material response. Because of this dependency on the configuration of the system, quantifiable comparisons of various material combinations should be based on tests using similar fretting fatigue configurations and material couples.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E2789-10(2015) Referenced Document

  • ASTM E1012 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
  • ASTM E1823 Standard Terminology Relating to Fatigue and Fracture Testing
  • ASTM E1942 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
  • ASTM E3 Standard Practice for Preparation of Metallographic Specimens
  • ASTM E4 Standard Practices for Force Verification of Testing Machines
  • ASTM E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
  • ASTM E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
  • ASTM E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
  • ASTM G15 Standard Terminology Relating to Corrosion and Corrosion Testing
  • ASTM G190 Standard Guide for Developing and Selecting Wear Tests*， 2024-04-20 Update
  • ASTM G40 Standard Terminology Relating to Wear and Erosion

ASTM E2789-10(2015) history

Standard Guide for Fretting Fatigue Testing


Copyright ©2024 All Rights Reserved