ASTM D1790-14
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- Standard No.
- ASTM D1790-14
- Release Date
- 2014
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D1790-21
- Latest
- ASTM D1790-21
- Scope
4.1 Data obtained by this test method have been used to predict the behavior of plastic sheeting at low temperatures only if the conditions of deformation are similar to those specified in this test method. This test method is useful for specification testing and for comparative purposes, but does not necessarily determine the lowest use temperature for a particular plastic.
4.2 It has been demonstrated that on calendered sheeting the brittleness temperature is sensitive to the direction of fold. It has also been demonstrated that the brittleness temperature is sensitive to the direction of sampling. Therefore, it is imperative that the procedure for taking specimens and folding be followed explicitly.
1.1 This test method covers the determination of that temperature at which plastic sheeting 1.00 mm (0.040 in.) or less in thickness exhibits a brittle failure under specified impact conditions.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Note 1: This test method was developed jointly with the Society of the Plastics Industry, primarily for use with plasticized vinyl sheetings. Its applicability to other plastic sheetings must be verified by the user.
1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 2: This test method and ISO8201;8570 address the same subject matter, but differ in technical content.
ASTM D1790-14 Referenced Document
- ASTM D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D618 Standard Practice for Conditioning Plastics for Testing
- ASTM D6988 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D883 Standard Terminology Relating to Plastics
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ISO 8570 Plastics; film and sheeting; determination of cold-crack temperature
ASTM D1790-14 history
- 2021 ASTM D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- 2014 ASTM D1790-14 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- 2008 ASTM D1790-08 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- 2002 ASTM D1790-02 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- 1999 ASTM D1790-99 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
