- Standard No.
- GB/T 10543-2014
- Language
- Chinese, Available in English version
- Release Date
- 2014
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
-
GB/T 10543-2014
- Replace
-
GB 10543-2003
- Scope
- This standard specifies the size, structure and requirements of four types of hoses and hose assemblies used for aircraft ground refueling and oil discharge. This standard is applicable to: a) petroleum-based fuel oil with aromatic hydrocarbon content not exceeding 30% by volume; b) working environment temperature is -30°C~+65°C, and it is stored statically under the climate condition of -40°C~+70°C c) The maximum working pressure is 2.0 MPa, including the impact pressure that the hose bears during use.
GB/T 10543-2014 Referenced Document
- GB/T 14905-2009 Rubber and plastics hoses.Determination of adhesion between components
- GB/T 1690-2010 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids
- GB/T 20739-2006 Rubber products Guidelines for storage
- GB/T 24134-2009 Rubber and plastics hoses.Assessment of ozone resistance under static conditions
- GB/T 3512-2001 Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method
- GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
- GB/T 5563-2013 Rubber and plastics hoses and hose assemblies.Hydrostatic testing
- GB/T 5564-2006 Rubber and plastics hoses Subambient temperature flexibility tests
- GB/T 7528-2011 Rubber and plastics hoses and hose assemblies.Vocabulary
- GB/T 8019-1987 Motor gasoline and aviation fuels--Determination of existent gum--Jet evaporation method
- GB/T 9572-2013 Rubber and plastics hoses and hose assemblies.Determination of electrical resistance and conductivity
- GB/T 9573-2013 Rubber and plastics hoses and hose assemblies.Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
- GB/T 9881-2008 Rubber.Vocabulary
- ISO 7989-1 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
- YB/T 5357-2009 Steel wire coated with zinc or zinc-5% aluminum alloy
GB/T 10543-2014 history
- 2014 GB 10543-2014 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling.Specification
- 2003 GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling
- 1989 GB 10543-1989 Rubber hoses for aircraft ground fuelling and defuelling
GB/T 10543-2014 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling.Specification has been changed from GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling.