ASTM B483/B483M-13e1
Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
- Standard No.
- ASTM B483/B483M-13e1
- Release Date
- 2013
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM B483/B483M-20
- Latest
- ASTM B483/B483M-21
- Scope
1.1 This specification covers aluminum and aluminum-alloy drawn tube and drawnpipe in straight lengths and tube in coils for general purpose applications in the alloys (Note 2), and tempers shown in Tables 1 and 2. Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. [2.00 mm] and only in non-heat-treatable alloys.
Note 1—For drawn seamless tubes, see Specifications B210 and B210M, for tubes to be used in condensers and heat exchangers, Specifications B234 and B234M, and for seamless pipe, Specification B241/B241M. For extruded structural tube and pipe, see Specification B429.Note 2—this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Number System alloy designations are those of Table 3 preceded by A9, for example A91060 for aluminum 1060 in accordance with Practice E527.
1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM B483/B483M-13e1 Referenced Document
- ASTM B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- ASTM B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
- ASTM B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
- ASTM B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)*， 2024-04-20 Update
- ASTM B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
- ASTM B429 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
- ASTM B557 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- ASTM B557M Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
- ASTM B597 Standard Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002)
- ASTM B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
- ASTM B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products
- ASTM B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
- ASTM B918 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
- ASTM E1251 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
- ASTM E215 Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E527 Standard Practice for Numbering Metals and Alloys (UNS)
- ASTM E607 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
- ASTM E716 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
- SAE AMS2770 HEAT TREATMENT OF ALUMINUM AND ALUMINUM-BASE ALLOYS
- SAE AMS2772 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)
ASTM B483/B483M-13e1 history
- 2021 ASTM B483/B483M-21 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
- 2020 ASTM B483/B483M-20 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
- 2013 ASTM B483/B483M-13e1 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
- 2013 ASTM B483/B483M-13 Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications
- 2003 ASTM B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
- 2002 ASTM B483/B483M-02 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
- 2000 ASTM B483/B483M-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
