GB/T 8015.2-1987
Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method (English Version)

Standard No.

GB/T 8015.2-1987

Language

Chinese, Available in English version

Release Date

1987

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2005-12

Replace By

GB/T 8014.3-2005

Latest

GB/T 8014.3-2005

Scope

This standard is applicable to the determination of the thickness of anodized film on aluminum and aluminum alloy products. This standard is not applicable to the measurement of special films (such as dark oxide films) and films with rough sample substrates. Under normal industrial conditions, films above 10 μm can be measured. When the surface is smooth, the oxide film of 5-10 μm can also be measured.

GB/T 8015.2-1987 history

• 2005 GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method
• 1987 GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method

GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method was changed to GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method.

GB/T 8015.2-1987 -All Parts