- Standard No.
- GB/T 8014.3-2005
- Language
- Chinese, Available in English version
- Release Date
- 2005
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
-
GB/T 8014.3-2005
- Replace
-
GB/T 8015.2-1987
- Scope
- This part specifies the method for non-destructive determination of anodized film thickness of aluminum and aluminum alloys using a split-beam microscope. This section applies to general industrial oxide films with a film thickness greater than 10 μm, or oxide films with a smooth surface with a film thickness of not less than 5 μm. This section does not apply to dark oxide films or oxide films with rough surfaces.
GB/T 8014.3-2005 history
- 2005 GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method
- 1987 GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method
GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method has been changed from GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Split-beam microscope method.