GB 9816.1-2013
Thermal-links.Part 1:Requirements and application guide (English Version)
- Standard No.
- GB 9816.1-2013
- Language
- Chinese, Available in English version
- Release Date
- 2013
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2024-06
- Replace By
- GB/T 9816.1-2023
- Latest
- GB/T 9816.1-2023
- Replace
- GB 9816-2008
- Scope
- This part of GB 9816 stipulates the classification, marking, mechanical requirements, electrical requirements, temperature test, and technical requirements for rust prevention of thermal links. This section applies to thermal links installed in electrical appliances, electronic equipment and similar components used in general indoor environments to prevent them from overheating in the event of a fault. If the climate and other conditions of the environment in which the thermal-link is located are similar to those specified in this section, this section can also be used for thermal-links used in non-indoor conditions. This section also applies to simple-shaped thermal links (such as fuses or fuses), as long as the molten material discharged during operation does not affect the safe use of the equipment, especially for hand-held or portable equipment, regardless of its location. It will not affect their safe use. This standard applies to thermal-links with a rated voltage not exceeding 690 V AC and DC and a rated current not exceeding 63 A. The purpose of this section is: a) to develop requirements for thermal links; b) to define the method of testing; c) to provide useful information for the application of thermal links in equipment. This standard does not apply to thermal links used in extreme conditions such as corrosive or explosive atmospheres. This standard does not apply to thermal links used on AC circuits with frequencies below 45 Hz or above 62 Hz.
GB 9816.1-2013 Referenced Document
- GB 14536.1-2008 Automatic electrical controls for household and similar use.Part 1:General requirements
- GB 17196-1997 Connecting devices--Flat quick-connect terminations for electrical copper conductors--Safety requirements
- GB 8898-2011 Audio, video and similar electronic apparatus.Safety requirements
- GB/T 11021-2007 Electrical insulation.Thermal classification
- GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance-Part 1:Ageing procedures and evaluation of test results
- GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems.Part 1:Principles,requirements and tests
- GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- GB/T 5169.11-2006 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products
- GB/T 5169.16-2008 Fire hazard testing for electric and electronic products.Part 16:Test flames.50W horizontal and vertical flame test methods
- GB/T 5169.17-2008 Fire hazard testing for electric and electronic products.Part 17:Test flames.500W flame test methods
- GB/T 5169.19-2006 Fire hazard testing for electric and electronic products.Part 19: Abnormal heat.Mould stress relief distortion test
- GB/T 5169.21-2006 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test
GB 9816.1-2013 history
- 2023 GB/T 9816.1-2023 Thermal links Part 1: Requirements and application guidelines
- 2013 GB 9816.1-2013 Thermal-links.Part 1:Requirements and application guide
- 2008 GB 9816-2008 Thermal-links.Requirements and application guide
- 1998 GB 9816-1998 Thermal-links--Requirements and application guide
GB 9816.1-2013 Thermal-links.Part 1:Requirements and application guide has been changed from GB 9816-2008 Thermal-links.Requirements and application guide.
