This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, information signs, packaging, transportation and storage, safety of mobile lifting working platforms for bridge inspection and maintenance (hereinafter referred to as bridge inspection platforms) General principles of use are required. This standard applies to truss mobile bridge inspection platforms. This standard does not apply to special inspection and maintenance equipment fixedly installed on the lower part of the bridge.
JB/T 11700-2013 Referenced Document
GB 18209.1 Electrical safety of machinery.Indication,marking and actuation.Part 1:Requirements for visual,acoustic and tactile signals
GB 18209.2 Electrical safety of machinery.Indication,marking and actuation.Part 2:Requirements for marking
GB 50256 Code for construction and acceptance of electric device of crane electrical equipment installation engineering*, 2014-12-02 Update
GB/T 10858 Aluminum and aluminum alloy welding wire*, 2023-09-07 Update
GB/T 1231 Specifications of high strength bolts with large hexagon head ,large hexagon nuts,plain washers for steel structures
GB/T 12470 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels*, 2018-03-15 Update
GB/T 3190 Chemical composition of wrought aluminium and aluminium alloys*, 2020-03-31 Update
GB/T 3766 Hydraulic fluid power.General rules and safety requirements for systems and their components*, 2015-12-31 Update
GB/T 5117 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118 Covered electrodes for manual metal arc welding of creep-resisting steels
GB/T 5293 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels*, 2018-03-15 Update
GB/T 6892 Aluminum and aluminum alloy extruded profiles for general industrial use*, 2023-09-07 Update
GB/T 8110 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels*, 2020-11-19 Update
GB/T 985.1 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding
GB/T 985.2 Recommended joint preparation for submerged arc welding
GB/T 985.3 Recommended Groove for Gas-Shield Welding on Aluminum and Its Alloys
GB/T 985.4 Recommended joint preparation for welding on clad steels
JB/T 5000.3 Heavy mectlanical general techniqueg.Part 3: And standards welding
JB/T 11700-2013 history
2013JB/T 11700-2013 Mobile elevating work platforms.Work platforms for bridge inspection and maintenance