JB/T 10349-2013
Dry blasting machine (English Version)
- Standard No.
- JB/T 10349-2013
- Language
- Chinese, Available in English version
- Release Date
- 2013
- Published By
- Professional Standard - Machinery
- Latest
- JB/T 10349-2013
- Replace
- JB/T 10349-2002
- Scope
- This standard specifies the terms and definitions, technical requirements, testing and inspection, inspection rules and markings, packaging, transportation, storage, sandblasting quality and judgment basis of dry sandblasting machines. This standard applies to dry sandblasting machines (hereinafter referred to as sandblasting machines) that are powered by compressed air, have a working pressure not greater than 0.8 MPa, use abrasives as the medium, and are intended for surface treatment.
JB/T 10349-2013 Referenced Document
- GB 150 Pressure Vessels (Bound Edition)*， 2024-04-20 Update
- GB 15763.2 Safety glazing materials in building-Part2:Tempered glass
- GB 20426 Emission standard for pollutants from coal industry
- GB 5226.1 Safety of machinery--Electrical equipment of machines--Part 1: General requirements*， 2019-06-04 Update
- GB/T 1186 Rubber hoses, textile-reinforced, for compressed air.Specification*， 2016-12-13 Update
- GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
- GB/T 191 Packaging.Pictorial marking for handling of goods
- GB/T 25198 Pressure vessel head*， 2023-08-06 Update
- GB/T 7932 Pneumatic fluid power-General rules and safety requirements for systems and their components*， 2017-07-12 Update
- GB/T 8923 Rust grades and preparation grades of steel surfaces before application of paints and related products
- GB/T 9019 Nominal diameter for pressure vessels*， 2015-12-10 Update
- GB/T 9969 General principles for preparation of instructions for use of industrial products
- GBZ/T 192.1 Determination of dust in the air of workplace.Part l：Total dust concentration
- GBZ/T 192.3 Determination of dust in the air of workplace. Part 3：Distribution of particulate
- GBZ/T 192.4 Determination of dust in the air of workplace. Part 4：Content of free silica in dust
- HG/T 2192 Rubber hoses for sand and grit blasting. Specification
- JB/T 4297 Pump product painting technical conditions*， 2021-12-02 Update
- JB/T 4711 Coating and packing for pressure vessels transport
- TSG R0004 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
- TSG R0005 Mobile Pressure Vessel Safety Technical Supervision Regulations
JB/T 10349-2013 history
- 2013 JB/T 10349-2013 Dry blasting machine
- 2002 JB/T 10349-2002 Dry blast machine
