This standard specifies the type, model, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of pipeline canned electric pumps. This standard is applicable to system pressure ≤ 1.6 MPa and the conveying medium is temperature
JB/T 10483-2013 Referenced Document
GB 10395.8 Tractors and machinery for agriculture and forestry.Technical means for ensuring safety.Part 8: Irrigation pumps and machines
GB 10396 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment.Safety signs and hazard pictorials.General principles
GB 1971 Rotating electrical machines. Terminal markings and direction of rotation
GB 755 Rotating electrical machines.Rating and performance
GB/T 191 Packaging.Pictorial marking for handling of goods
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9239.1 Mechanical vibration. Balance quality requirements for rotors in a constant(rigid) state. Part 1: Specification and verification of balance tolerances
JB/T 50080 Submersible electric pump - Reliability check and evaluation method
JB/T 5673 Agriculture and forestry tractors and machinery.General requirements of painting*, 2015-10-10 Update
JB/T 8097-1999 Methods of measuring and evaluating vibration of pumps
JB/T 8098-1999 Methods of measuring and evaluating noise of pumps
JB/T 9804.1 Types and basic parameters for micropump