CJ/T 406-2012
Stainless steel faucets (English Version)

Standard No.

CJ/T 406-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

Professional Standard - Urban Construction

Latest

CJ/T 406-2012

Scope

This standard specifies the classification, product structure, materials, supporting devices, requirements, test methods, inspection rules, signs, certificates of conformity and instructions for use, packaging, transportation and storage of stainless steel faucets (hereinafter referred to as faucets). This standard applies to stainless steel faucets with a nominal size not greater than DN20, a nominal pressure not greater than 0.6MPa, and a medium temperature not greater than 90°C.

CJ/T 406-2012 Referenced Document

• CJ/T 194 Non-contact water supply device*， 2014-04-09 Update
• CJJ 110 Techncial specification of pipe system for fine drinking water
• GB 18145 Ceramic cartridge faucets*， 2014-05-06 Update
• GB 25501 Minimum allowable values of water efficiency and water efficiency grades for faucets*， 2019-12-31 Update
• GB/T 10125 Corrosion tests in artificial atmospheres—Salt spray tests*， 2021-08-20 Update
• GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
• GB/T 20878 Stainless and heat resisting steels—Designation and chemical composition
• GB/T 21873 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
• GB/T 23447 Sanitary Ware Shower Head*， 2023-08-06 Update
• GB/T 23448 Sanitary ware—Flexible hose*， 2019-08-30 Update
• GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
• GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
• GB/T 5593 Structure ceramic materials used in electronic component and device*， 2015-05-15 Update
• GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
• HG/T 3090 General rules of visual quality for moulded and extruded rubber products
• HG/T 3097 Rubber seals Jonit rings for pipelines for hot-water supply up to 110℃. Specification for the materials
• ISO 3822-1:1999 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement
• ISO 3822-2 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
• JC/T 1043-2007 Iimit of lead extraction in faucets
• JC/T 932 Drainage fittings for sanitary wares*， 2013-04-25 Update
• QB 1334 General technical conditions for faucets

CJ/T 406-2012 history

• 2012 CJ/T 406-2012 Stainless steel faucets