GB/T 25389.1-2010
Wind turbine low-speed permanent magnet synchronous generator.Part 1:Technical condition (English Version)
- Standard No.
- GB/T 25389.1-2010
- Language
- Chinese, Available in English version
- Release Date
- 2010
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2018-12
- Replace By
- GB/T 25389.1-2018
- Latest
- GB/T 25389.1-2018
- Scope
- This part of GB/T 25389 specifies the main types, technical requirements, test methods, inspection rules, marking and packaging, service life and other requirements of low-speed permanent magnet synchronous generators for grid-connected wind turbines. This part applies to low-speed permanent magnet synchronous generators, and other types of generator sets can be used as a reference.
GB/T 25389.1-2010 Referenced Document
- GB 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity
- GB 10069.3 Noise determination methods and limits for rotating electrical machines - Part 3: Noise limits
- GB 755 Rotating electrical machines.Rating and performance
- GB/T 10069.1 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for sevice in general environmental condition
- GB/T 191 Packaging.Pictorial marking for handling of goods
- GB/T 1993 Cooling methods for rotating electrical machines
- GB/T 25381 Genealogy of wind turbine generator system
- GB/T 25389.2 Wind turbines—Permanent magnet synchronous generator—Part 2: Testing methods*， 2018-05-14 Update
- GB/T 2900.25 Electrotechnical terminology.Rotating electrical machines
- GB/T 4831 Specification for model of rotating electrical motor*， 2016-02-24 Update
- GB/T 4942.1 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
- GB/T 997 Classification of types of construction，mounting arrangements and terminal box position (IM Code) for rotating electrical machines*， 2022-10-14 Update
- JB/T 10098 Impulse voltage withstand levels of rotating a.c. machines with form-wound stator soils
- JB/T 5811 Test method and limits of form-wound winding for alternating current low-voltage electrical machines
- JB/T 9615.1 Test methods of the interturn insulation on random wound winding for AC low-voltage machines
- JB/T 9615.2 Test Limits of the interturn insulation on random wound winding for AC low-voltage machines
- XB/T 903-2002 Materials of sintered neodymium iron boron permanent magnets----Electroplating coatings
GB/T 25389.1-2010 history
- 2018 GB/T 25389.1-2018 Wind turbines.Permanent magnet synchronous generator.Part 1:Technical conditions
- 2010 GB/T 25389.1-2010 Wind turbine low-speed permanent magnet synchronous generator.Part 1:Technical condition
