GB/T 25362-2010
Electromechanical solenoid fuel injector assemblies of gasoline engines.Technical requirements (English Version)
- Standard No.
- GB/T 25362-2010
- Language
- Chinese, Available in English version
- Release Date
- 2010
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 25362-2010
- Scope
- This standard specifies the terms and definitions, technical requirements, inspection rules, marks, packaging, transportation and storage of solenoid valve injectors for gasoline engines. This standard applies to fuel injectors with fuel injection pressure in the range of 150kPa to 450kPa.
GB/T 25362-2010 Referenced Document
- GB 17930 Gasoline for motor vehicles*， 2016-12-23 Update
- GB 18351 Ethanol gasoline for motor vehicles (E10)*， 2017-09-07 Update
- GB 18655-2002 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
- GB/T 10125 Corrosion tests in artificial atmospheres—Salt spray tests*， 2021-08-20 Update
- GB/T 13384 General specifications for packing of mechanical and electrical product
- GB/T 14986 High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, corrosion-resisting,iron-aluminium, Permanent permeability, soft magneticalloys
- GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
- GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
- QC/T 413-2002 Basic Technical Conditions of Automotive Electrical Equipment
- QC/T 417.1 Automotive wiring harness connectors Part 1 Definitions, test methods and general performance requirements (automotive part)
- QC/T 417.2 Automotive wiring harness connectors Part 2 Test methods and general performance requirements (motorcycle part)
- QC/T 417.3 Automotive wiring harness connectors - Part 3 Dimensions and special requirements for single-wire blade connectors
- QC/T 417.4 Automotive wiring harness connectors - Part 4 Dimensions and special requirements for multi-wire blade connectors
- QC/T 417.5 Automotive wiring harness connectors - Part 5 - Dimensions and special requirements for cylindrical connectors for single-wire and multi-wire connectors
GB/T 25362-2010 history
- 2010 GB/T 25362-2010 Electromechanical solenoid fuel injector assemblies of gasoline engines.Technical requirements
