GOST R IEC 60065-2002
Audio-, video- and similar electronic apparatus. Safety requirements

Standard No.
GOST R IEC 60065-2002
Release Date
2002
Published By
RU-GOST R
Status
 2008-01
Replace By
GOST R IEC 60065-2005
Latest
GOST R IEC 60065-2009
Scope
This standard applies to electronic equipment designed to be supplied from a mains supply or networked devices and intended for

GOST R IEC 60065-2002 Referenced Document

  • IEC 60027 Letter Symbols to be used in electrical technology (Edition 4.0)
  • IEC 60038:1983 IEC standard voltages
  • IEC 60068-2-32:1975 Basic environmental testing procedures. Part 2 : Tests. Test Ed: Free fall
  • IEC 60068-2-3:1969 Basic environmental testing procedures. Part 2 : Tests. Test Ca: Damp heat, steady state
  • IEC 60068-2-6:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
  • IEC 60068-2-75:1997 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
  • IEC 60085:1984 Thermal evaluation and classification of electrical insulation
  • IEC 60112:1979 Recommended method for determining the comparative tracking index of solid insulating materials under moist conditions
  • IEC 60127-6:1994 Miniature fuses - Part 6: Fuse-holders for miniature cartridges fuse-links
  • IEC 60127:1974 Cartridge fuse-links for miniature fuses
  • IEC 60130-2:1965 Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associated sound equipment
  • IEC 60130-8:1976 Connectors for frequencies below 3 MHz. Part 8 : Concentric connectors for audio circuits in radio receivers
  • IEC 60130-9:2000 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
  • IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
  • IEC 60169-2:1965 Radio-frequency connectors. Part 2 : Coaxial unmatched connector
  • IEC 60169-3:1965 Radio-frequency connectors. Part 3 : Two-pin connector for twin balanced aerial feeders
  • IEC 60173:1964 Colours of the cores of flexible cables and cords
  • IEC 60227 Corrigendum 1 - Polyvinyl chloride insulated flexible cables and cords with circular conductors and a rated voltage not exceeding 750 V
  • IEC 60227-2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
  • IEC 60245:1967 Rubber insulated flexible cables and cords with circular conductors and a rated voltage bit exceeding 750 V
  • IEC 60249-2:1970 Metal-clad base materials for printed circuits - Part 2: Specifications
  • IEC 60260:1968 Test enclosures of non-injection type constant relative humidity
  • IEC 60268-1:1985 Sound system equipment. Part 1 : General
  • IEC 60317 Specifications for particular types of winding wires - Part 9: Enamelled round copper wires with high mechanical properties for use in refrigerant systems
  • IEC 60320-1:1994 Appliance couplers for household and similar general purposes - Part 1: General requirements
  • IEC 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
  • IEC 60320:1981 Appliance couplers for household and similar general purposes
  • IEC 60335-1:1991 Safety of household and similar electrical appliances; part 1: general requirements
  • IEC 60384-1:1982 Fixed capacitors for use in electronic equipment. Part 1: Generic specification

GOST R IEC 60065-2002 history




Copyright ©2024 All Rights Reserved