This standard specifies the classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of polyvinyl chloride coated membrane materials. This standard applies to polyvinyl chloride-coated membrane materials for canopies that are made of polyethylene terephthalate fiber fabric as the base, polyvinyl chloride plastic paste as the coating material, and the direct coating and scraping process. .
QB/T 4042-2010 Referenced Document
FZ/T 01007-1991 Test method for low temperature resistance of coated fabrics
FZ/T 01008-1991 Test method for hot air accelerated aging of coated fabrics
GB 8624-2006 Classification for burning behavior of building materials and products
GB/T 15596-2009 Plastics.Determination of changes in colour and variations in properties after exposure to daylight under glass,natural weathering or laboratory light sources
GB/T 16422.2-1999 Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
GB/T 20284-2006 Single burning item test for building materials and products
GB/T 20285-2006 Toxic classification of fire effluents hazard for materials
GB/T 250-2008 Textiles.Tests for colour fastness.Grey scale for assessing change in colour
GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 8626-2007 Test method of flammability for building materials
HG/T 2580-2008 Rubber of plastics-coated fabrics.Determination of tensile strength and elongation at break
HG/T 2582-2008 Rubber-or plastics-coated fabrics.Determination of resistance to penetration by water
HG/T 2867-1997 Rubber-or plastics-coated fabrics-standard atmospheres for conditioning and testing
HG/T 3050.1-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 1:Method for determination of length,width and net mass
HG/T 3050.2-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 2:Method for determination of total mass per unit area,mass per unit area of coating and mass per unit area of substrate