AS/NZS 4782.3:2006
Double-capped fluorescent lamps— Performance specifications Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps

Standard No.
AS/NZS 4782.3:2006
Release Date
2006
Published By
Standard Association of Australia (SAA)
Status
 2014-07
Replace By
AS/NZS 4782.3:2014
Latest
AS/NZS 4782.3:2014
Scope
This part of the Standard outlines a procedure for quantitative analysis of mercury present in fluorescent lamps that are used in general lighting service and which are covered within the scope of AS/NZS 4782.1 and AS/NZS 60901. The testing method specifies the procedures that can be used to determine accurately the mercury content in a fluorescent lamp in which mercury is introduced as the medium for discharge between the electrodes. The method involves the chemical digestion of the mercury contained within a lamp and the determination of that mercury content on a per unit basis. This is achieved using a method of solubilization of the entire mercury content contained within the tube using acidic digestion methods and the accurate determination of that mercury content using standard mercury solutions. This will allow comparisons between lamps in batches and comparisons with other internationally accepted standards for mercury content in fluorescent lamps. This Interim Standard covers methods of determination of mercury by wet chemical analysis. This Interim Standard does not apply to fluorescent lamps that are intended for special purposes as stated in Clause 1.2 of AS/NZS 4782.2.

AS/NZS 4782.3:2006 Referenced Document

  • AS 2164 Laboratory glassware - One-mark volumetric flasks
  • AS 2165 Laboratory glassware - Burettes
  • AS 2166 Laboratory glassware - One-mark pipettes
  • AS 2234 Laboratory glassware - Beakers
  • AS 2830.1 Good laboratory practice - Chemical analysis
  • AS/NZS 2243.1 Safety in Laboratories Part 1: Planning and operational aspects
  • AS/NZS 2243.10 Safety in laboratories - Storage of chemicals
  • AS/NZS 2243.2 Safety in laboratories - Chemical aspects*2006-06-30 Update
  • AS/NZS 2243.6 Safety in laboratories - Plant and equipment aspects
  • AS/NZS 2243.8 Laboratory safety fume hood
  • AS/NZS 4782.1 Double-capped fluorescent lamps - Performance specifications - General
  • AS/NZS 4782.2 Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS)
  • AS/NZS 60901 Single-capped fluorescent lamps - Performance specifications*2024-04-19 Update

AS/NZS 4782.3:2006 history

  • 2014 AS/NZS 4782.3:2014 Double-capped fluorescent lamps — Performance specifications, Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps
  • 2006 AS/NZS 4782.3:2006 Double-capped fluorescent lamps— Performance specifications Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps



Copyright ©2024 All Rights Reserved