GB/T 24293-2009
Digital thermostatic faucet (English Version)

Standard No.

GB/T 24293-2009

Language

Chinese, Available in English version

Release Date

2009

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 24293-2009

Scope

This standard specifies the terms and definitions, classification and labeling, conditions of use, requirements, test methods, inspection rules, signs, packaging, transportation and storage of numerically controlled thermostatic faucets. This standard is applicable to numerically controlled constant temperature faucets with a nominal pressure not greater than 0.6MPa and a hot water temperature not greater than 85°C, installed in washrooms (toilets, bathrooms), kitchens, hospitals, hotels, etc. .

GB/T 24293-2009 Referenced Document

• GB 14536.1-2008 Automatic electrical controls for household and similar use.Part 1:General requirements
• GB 18145 Ceramic cartridge faucets*， 2014-05-06 Update
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB/T 10125 Corrosion tests in artificial atmospheres—Salt spray tests*， 2021-08-20 Update
• GB/T 1176 Casting copper and copper alloys*， 2013-09-18 Update
• GB/T 12600 Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials
• GB/T 13448 Test methods for prepainted steel sheet and strip*， 2019-03-25 Update
• GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
• GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
• GB/T 5121.1 Methods for chemical analysis of copper and copper alloys.Part 1:Determination of copper content
• GB/T 5121.10 Methods for chemical analysis of copper and copper alloys.Part 10: Determination of tin content
• GB/T 5121.11 Methods for chemical analysis of copper and copper alloys.Part 11:Determination of zinc content
• GB/T 5121.12 Methods for chemical analysis of copper and copper alloys.Part 12:Determination of antimony content
• GB/T 5121.13 Methods for chemical analysis of copper and copper alloys.Part 13:Determination of aluminium content
• GB/T 5121.14 Methods for chemical analysis of copper and copper alloys.Part 14:Determination of manganese content
• GB/T 5121.15 Methods for chemical analysis of copper and copper alloys.Part 15:Determination of cobalt content
• GB/T 5121.16 Methods for chemical analysis of copper and copper alloys.Part 16:Determination of chromium content
• GB/T 5121.17 Methods for chemical analysis of copper and copper alloys.Part 17:Determination of beryllium content
• GB/T 5121.18 Methods for chemical analysis of copper and copper alloys.Part 18:Determination of magnesium content
• GB/T 5121.19 Methods for chemical analysis of copper and copper alloys.Part 19:Determination of silver content
• GB/T 5121.2 Methods for chemical analysis of copper and copper alloys.Part 2:Determination of phosphorus content
• GB/T 5121.20 Methods for chemical analysis of copper and copper alloys.Part 20:Determination of zirconium content
• GB/T 5121.21 Methods of chemical analysis of copper and copper alloys - Part 21: Determination of titanium content
• GB/T 5121.22 Methods for chemical analysis of copper and copper alloys.Part 22: Determination of cadmium content
• GB/T 5121.23 Methods for chemical analysis of copper and copper alloys.Part 23:Determination of silicon content
• GB/T 5121.24 Methods for chemical analysis of copper and copper alloys.Part 24:Determination of selenium and tellurium content
• GB/T 5121.25 Methods for chemical analysis of copper and copper alloys.Part 25:Determination of boron content
• GB/T 5121.26 Methods for chemical analysis of copper and copper alloys.Part 26:Determination of mercury content
• GB/T 5121.27 Methods for chemical analysis of copper and copper alloys.Part 27:The inductively coupled plasma atomic emission spectromertric method
• GB/T 5121.28 Methods for chemical analysis of copper and copper alloys—Part 28：Determination of chromium,iron,manganese,cobalt,nickel,zinc,arsenic,selenium,silver,cadmium,tin,antimony,tellurium,lead and bismuth content—Inductively coupled plasma-mass spectrometry*， 2021-12-31 Update
• GB/T 5121.29 Methods for chemical analysis of copper and copper alloys.Part 29:Determination of aluminium oxide content*， 2015-09-11 Update
• GB/T 5121.3 Methods for chemical analysis of copper and copper alloys.Part 3:Determination of lead content
• GB/T 5121.4 Methods for chemical analysis of copper and copper alloys.Part 4:Determination of carbon and sulfur content
• GB/T 5121.5 Methods for chemical analysis of copper and copper alloys.Part 5: Determination of nickel content
• GB/T 5121.6 Methods for chemical analysis of copper and copper alloys.Part 6:Determination of bismuth content
• GB/T 5121.7 Methods for chemical analysis of copper and copper alloys.Part 7: Determination of arsenic content
• GB/T 5121.8 Methods for chemical analysis of copper and copper alloys.Part 8:Determination of oxygen content
• GB/T 5121.9 Methods for chemical analysis of copper and copper alloys.Part 9:Determination of iron content
• GB/T 5231 Designation and chemical composition of wrought copper and copper alloys*， 2022-03-09 Update
• GB/T 5270 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
• GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
• GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
• GB/T 9286 Paints and varnishes—Cross-cut test*， 2021-08-20 Update
• HG/T 3090 General rules of visual quality for moulded and extruded rubber products
• HG/T 3091 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials

GB/T 24293-2009 history

• 2009 GB/T 24293-2009 Digital thermostatic faucet